 |
M. F. WATER COOLED
CAPACITOR
|
|
|
|
• M. F. WATER COOLED CAPACITOR FOR INDUCTION HEATING : TECHNICAL DATA
MAGNEWIN Medium and high frequency, water-cooled capacitor are specially designed and manufactured for induction heating and melting applications. Manufactured against specific orders, and tailor-made to suit the specific requirement of the customer. These products employ the rich experience and technology acquired by us over the past many years. MAGNEWIN capacitors are housed in aluminum casings.
Capacitor elements are wound with Corona ring design, edge and end folding of the electrode (aluminum foil) is done during the winding process. This feature greatly reduces the possibility of corona discharge and increases partial discharge inception voltage (PDIV) levels. End soldering of the foil ensures firm electrical and mechanical contact and achieve drastically low losses. Capacitor elements are wound with high purity imported aluminum foil as electrode, hazy BOPP film as dielectric medium.
Capacitors are vacuum impregnated with NON PCB fluids having very high heat transfer coefficient characteristics thereby ensuring low operating power losses and longer life due to low heat generation
|
|
|
|
|
MAGNEWIN Water cooled capacitors are designed for very high levels of safety, reliability and life expectancy. Capacitors are provided with high thermal conductivity copper tubes, through which cooling water is circulated. The effective dissipation of heat by this method is extremely important to achieve desired performance and life expectancy levels. The water-cooled capacitors are generally enclosed in aluminum cases so as to avoid heating due to magnetic fields. Thus the capacitors run much cooler compared to those of conventional design. Their expected life is also longer. In the dead case construction the current returns through water-cooling terminals instead of through the capacitor case. This leads to longer capacitor life since less heat is generated in the case and absorbed by dielectric fluid. This construction permits, capacitor mounting directly to the chassis without insulators, permitting savings in installation expenses. Thermal, electrical and over pressure protection can be provided on specific request. Each capacitor is tested to meet the Indian as well as International Standards.
|
|
|
|
|
GENERAL TECHNICAL SPECIFICATIONS :
Output
|
|
Upto 6000 kVAr |
|
|
|
Voltage
|
|
Upto 4000 V |
|
|
|
Frequency
|
|
Upto 50 kHz. |
|
|
|
Construction
|
|
Dead / Live Case |
|
|
|
Cooling Media
|
|
D.M. Water |
|
|
|
Tappings
|
|
As desired |
Note: Detail technicals will be furnished on specific request. |
|
|
|
|
|
|
|
|
|
|
|
|
|
High Voltage Capacitors || App P. F. Improvement Capacitors || Surge Capacitors || Water Cooled Capacitors
Home || Products || Profile || Clients || Feedback || Contact
Us || Sitemap
|
